RailTable 4000 Specifications: 13 ft Frame, 20 mm Rail

Drawn to scale

Thirteen feet, part by part

Every dimension below is taken from the manufacturer's own drawing. Nothing here is rounded to look better.

1
20 mm profile railPreloaded linear rail along the full span — the reason the cut cannot wander.
2
Moving cable ductThe tool cable rides in a drag chain instead of dragging across the panel.
3
5 mm laser-cut carriage plateOne plate, cut in one operation, so the tool sits square to the rail by construction.
4
45 × 90 mm sigma aluminium bedExtruded bed rails: the panel slides, nothing marks the face.
5
40 × 60 × 2 mm steelMain beam and legs. Steel, not aluminium, where the load actually is.
6
30 × 30 × 2 mm steelCross members tying the frame square.
7
Adjustable stopSet the length once; every panel in the run comes off the same.

Front elevation, 1 unit = 1 mm. Bed depth 29.1 in (740 mm).

Model	RailTable 4000
Supplied as	Table, rail and both carriages
Electrics	220 V supply cable in the moving duct — no motor and no control gear of its own
Frame	Single-piece 13 ft (4 m) weldment; legs bolt on
Frame length	157 in / 13 ft 1 in (4,000 mm) standard — 236 in / 19 ft 8 in (6 m) built to order, at a price difference
Overall height	45.3 in (1,150 mm)
Working height	32.7 in (830 mm)
Bed depth	29.1 in (740 mm)
Linear motion	20 mm (0.79 in) profile rail, full span
Bed rails	45 × 90 mm (1.77 × 3.54 in) sigma aluminium extrusion
Main beam & legs	40 × 60 × 2 mm (1.57 × 2.36 × 0.08 in) steel box section
Cross members	30 × 30 × 2 mm (1.18 × 1.18 × 0.08 in) steel box section
Carriage plates	5 mm (0.20 in) laser-cut steel, drilled for tool mounting
Cable management	Moving cable duct along the beam
Fence	Adjustable mechanical stop, full length
Feed	Manual, single operator
Crate	157 × 31.5 × 19.7 in (400 × 80 × 50 cm), one piece — fits a 20 ft container
Build time	5 days from order
Transit to the Americas	Approx. 25 days by sea